|
  |
|
|
Wine Making At Home - Making Your First Batch
If this is your first time attempting the art, the following fool proof, easy method should be your first try. Purchase five gallons of good quality grape juice from local wine supplier. If white wine is preferred, some of the better juices are: Sauvignon Blanc
Riesling
Chardonnay
Chenin Blanc For red Wines:
Cabernet Sauvignon
Zinfandel
Merlot
Pinot Noir
Cabernet Franc Nowadays, most of the juice producers have already sulphanated the juice (for sterilization) and added the yeast. Open the pail, smell, and taste the juice. There should be slight wine-like odour and the juice should taste like premature sweet champagne. This indicates that the primary fermentation is on its way; otherwise cover the pail and leave it at room temperature for approximately one week. Transfer the juice to a clean five gallons sterilized carboy leaving approximately three inches from the top. Place the air trap and leave it for approximately one month.
If the juice is not sulphanated add two campden tablets for each one-gallon of juice (10 tablets for 5 gallons). Make sure that it has dissolved completely, crushing the tablets speeds up the process, cover and leave for 24 hours.
The sulphur from sodium/potassium-metabisulphate, once released throughout the juice, will destroy any yeast within twenty-four hours. There are millions of wild spores present in the fruit, so do not play the hit and miss method with your wine. Purchase good quality wine yeast and add it to the juice following the manufacturer’s instructions. It usually comes pre-packaged for five gallons batches. The juice is usually packed in a five-gallon polyethylene/polypropylene pail. This container is perfect for primary fermentation.
Make sure there is room for expansion, as it will overflow. Once a day for the following week, open the pail and stir the juice with a clean ladle, plastic paddle, etc…. Place the lid on top of the pail and make sure the seal is not airtight. The gas produced is carbon dioxide, which exerts a lot of pressure and will split the container if not allowed to escape. Once the rapid fermentation has slowed down (approximately 1 week), transfer the juice to the five gallon sterilized carboy, place the air-trap and leave it for about one month. The carbon dioxide emission will be rapid at first and as the time passes it will slow down significantly. The rate of the bubbles being released through the air-trap will be a good indicator. The ambient temperature at this stage should be around 70 degrees F. A cool basement is the ideal temperature.
The carboy should be placed away from any source of heat or direct sunlight. The sunlight rays contain enough energy to oxidize the young wine. One month later, there should be enough sediment, lees, on the bottom of the carboy. Rack the wine to the second clean, sterilized carboy and replace the air lock. Care should be taken as not to disturb the sediment. If left behind, the yeast will start feeding off the lees, and produce undesired off-flavours. Rack it again in three months followed by three-month intervals until finished. Each time you siphon it do not be afraid to taste it.
The longer the wine stands the clearer it will become. Once the fermentation has ceased, the wine is ready. Filtering the wine is recommended if you plan to bottle it, otherwise drink it. Bon Voyage
|
|
 |
|
PLEASE VISIT THE CONTRIBUTOR'S WEBSITE
No reactions yet.
Please login or sign up to rate this intel.
Please login or sign up to add a comment.
The copyright for this content entitled "Wine Making At Home - Making Your First Batch" has been specified by the contributor as:
All Rights Reserved
This content may not be copied, distributed or adapted by anyone under any circumstances.
|
|
May, 2012
2008
January, February, March, April, May, June, July, August, September, October, November, December
2009
January, February, March, April, May, June, July, August, September, October, November, December
2010
January, February, March, April, May, June, July, August, September, October, November, December
2011
January, February, March, April, May, June, July, August, September, October, November, December
2012
January, February, March, April, May
|
|
Not a member yet?
Qondio is a powerful network for making it online. If you have a website to
promote, we can help.
Sign up and get in on the action.
|
|
Welcome to Qondio! Discover the awesome power this network can deliver by going to our About page. Or you could skip straight to the Sign Up form.
|
|
